CML FX Series

The CML FX003 is a CCIR, ZVEI and EIA Selcall tones decoder with microprocessor interface, on-chip oscillator and hexadecimal tone number output

The FX009 contains eight digitally controlled amplifiers with 15 gain steps and mute facility; an 8-bit serial data stream control  each amplifier 

The FX019 contains four digitally controlled amplifiers with 15 gain steps and mute; control of each individual amplifier is by an 8-bit serial data

The FX029 contains two digitally controlled amplifiers with ±48dB gain/attenuation in 2dB steps and mute input, and uncommitted inverting amplifier

The CML FX101L is a high-performance frequency sensitive switch. The set point may be varied over a wide range of frequencies

The FX103 is a QTC address decoder for use in pagers and mobile radios using selective signalling; features mute output and low power consumption

The FX105 CML is a tone operated switch, designed for tone decoding, in multitone signalling systems, with a phase locked loop as a frequency detector

The FX107 is an high performance signalling device; it is operate on a standard 3-Tone Sequential Code, and is housed in 16 lead ceramic package

The FX1103 is a hybrid selcall decoder and operate with a minimum of power; it can decode single and group calls, and include a mute and an alert output

Full-duplex inverter for cordless telephone voice privacy. On the chip there are two separate audio channels, two lowpass filters and a balanced modulator

The FX203 is a selective call encoder-decoder (CCIR, ZVEI and EEA) intended for use with microprocessor; two ports allow interface to external circuits

The FX205 CML is a pseudo sine wave generator with adjustable amplitude output and an enable gate input; it also converts pulses to sine waves.

The FX209 is an adaptive delta modulation encoder or decoder which can replace conventional ADC and corresponding DAC in many applications

The FX224 is a variable split-band voice scrambler with 32 different split-points externally programmable using 5-bit code either fixed or rolling

The FX303 is a Data Store Multiplexer - Display Driver

The FX304 contains an audio duplex filter and an inversion scrambler and is designed to meet Net-C Cellular specification

The FX306 is an audio filter array and contains a switched capacitor filter array with low group delay distortion and an amplifier with pre and de-emphasis

The FX309 is a variable slope delta modulation ideal for audio scrambler and wave form analysis

The FX315 is a CTCSS Encoder for sub-audio tone squelch systems with 40, low distortion, output frequencies derived from an external quartz crystal

The FX316 is an NMT audio filter and contains a 3.4 kHz and 4 kHz low pass filter plus an uncommitted amplifier and an on-chip oscillator

The FX323 is used for store address or character and output them to seven segment display; further four symbols can be displayed

The CML FX335 is an encoder and decoder for standard sub-tone; it includes a high pass filter and an audio switch; a stand-by mode reduces supply current

The CML FX346 is a full duplex audio processor; it contains low pass and high pass filter, gain adjustment and limiter plus wideband data filter

The CML FX365 is an encoder and decoder for standard sub-tone with serial and parallel µP interface; it includes a high pass filter and an audio switch

The CML FX366 contains four independent filter/gain blocks for AMPS/TACS: two bandpass and two highpass filters plus an amplifier for level adjustment

The CML FX375 is a tone operated squelch and voice band inverter designed for communications privacy; it is able to encode and decode all standard tones

The FX401 is a dual set-point, precision frequency sensitive switch; it incorporates amplifiers, logic arrays and output switch drivers.

The CML FX403 is a QTC address decoder for use in mobile and fixed station. It decodes a series of address or group codes

The FX406 is an audio filter array and contains a switched capacitor filter array with output for bandpass, lowpass, highpass and notch plus a PLL.

The FX407 is a five-tone, selective call, encoder-decoder with group calling function, high noise immunity, transpond facility, and sinewave output

The FX439 is a variable slope delta modulation ideal for audio scrambler and wave form analysis

The FX489 is a Full-Duplex GMSK Modem operating up to 19200 bits/s and with on-chip crystal oscillator and selectable Xtal/Clock frequencies

The CML FX503 is a tone generator which may be used as a Selcall encoder. The device has an AUTO REPEAT function and a TX delay facility.

The CML FX506 is an audio processor for mobile radio system with squelch, filtering, levelling and digital gain under µProcessor control

The FX507 is a five-tone, selective call, encoder-decoder with group calling function, high noise immunity, transpond facility, and sinewave output

The FX517 is a five-tone, selective call, encoder-decoder with group calling function, high noise immunity, transpond facility, and sinewave output

The CML FX529 is an FFSK modem designed for data transmission at 1200 baud; error check word is generated automatically

The FX589 is a full-duplex GMSK Modem operating at data rates up to 64kb/s with on-chip crystal oscillator and selectable Xtal/Clock frequencies

The CML FX609 is a full duplex CODEC for digital voice communications; up to 128kbps data/sampling clock rates are supported with on-chip oscillator

CML FX707 is a logic switch that allows sequential tones to be programmed using the rotary switches.

The CML FX709 is a CODEC for digital voice communications; up to 64kbps clock rates are supported with on-chip oscillator. VOX function is also supported.

The FX802 is a variable slope modulation intended to digitise voice and store it in RAM. Speech may be read and converted back into analogue form

The CML FX803 contains two tone generators, one tone decoder and one summing amplifier with programmable gain

The CML FX805 is a sub audio processor which contains a sub audio signal demodulator, a CTCSS tone decoder, and a CTCSS/NRZ Encoder

The CML FX806 is an audio processor which contains a preamplifier, VOGAD, pre-emphasis, de-emphasis and gain adjustment

The CML FX816 is an audio processor with gain, filtering and limiting specially designed for Nordic Mobile Telephone Cellular system

The CML FX829 is a baseband audio processor designed for trunked radio which has the level of two point modulation software programmable